DIY!!
#목공 #목공diy #목공기술
이번 영상은 탭핑 비트없이 글루건과 오일을 이용하여 나사산을 만드는 새로운 방법입니다.
장점은 볼트의 굵기와 형태에 상관없이 그리고 다양한 부재(목재, 플라스틱, 석고보드, 금속 등)에 나사선을 만들 수 있습니다.
단점은 글루건은 열에 약하기 때문에 볼트 체결시 마찰열에 주의해야 합니다.
감사합니다.
How to Make Anyone Can Thread Without Tapping Bits
This video is a new way to make a thread using a glue gun and oil without a tapping bit.
The advantage is that you can create threads of any size and shape of the bolt and on a variety of materials (wood, plastic, gypsum board, metal, etc.).
The disadvantage is that the glue gun is weak against heat, so you need to be careful about frictional heat when tightening bolts.
thank you.
Excelente tutorial , muy buenas demostraciones , con la pistola térmica se pueden hacer muchas cosas , gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia ( España) 🤓 😜
글루건으로 이런생각을하다니 정말 신박하네요
이 영상으로 글루건으로 여러가지 응용이 가능하다는걸 알았네요
잘보고갑니다
다음 영상이 기대되네요 ~
Super nice 👍
Pues para colgar cuadros y cosas sin tracción funciona. Pero nada más, esté material tiende a fluir con un poco de presión. Así qué la idea no es mala, pero hay que tomar las restricciones por el tipo de material.
I liked it! I’ve done similar things. I love hot glue. It’s very versatile when making prototypes. And it also comes in handy for problem-solving. This video could use a part 2 showing strength testing.
Excellent tutorial! Thank you sir! I will definitely be using this trick one day
Nice👍👍👍
Perfeito! Aqui isso se chama silicone
Muy Bien as ideas ,gracias por comparator❤️💜
It might hold a picture on the wall but theirs no clamping force the glue would strip threads out.
Interessante. Nunca imaginei. Vou testar em algumas peças que fabrico. Valeu.
👏👏👏 só não pode apertar muito que a rosca espana, porém para objetos pequenos e leve e uma ótima idéia. Parabéns 👏👏👏👏
Wanna try with 2 part epoxy, maybe I’ll use heavy grease for the bolt…
I wonder if you could do the same thing with a stronger glue. Maybe mixed epoxy or JB weld would be stronger. Would be interesting to test how much force it takes to rip out with the threads in the wood vs hot glue vs other things. Possibly some wood glues, superglue etc.
와!! 좋은 정보 감사합니다~!!! 정말 신박한 아이디어네요 이런채널을 이제야 알게되다니! 구독 꾸욱 누르고 가야죠~~~~!
This is a pretty good idea, you can buy resin to put into concrete so I’d imagine you could use some wood glue with this or stronger glue
Muito obrigado pela dica!!
Naturally, It is useful for light items such as clothes hangers and toilet paper hangers because its strength is weak compared to anchor nuts.
Thank you 😄
당연히 앙카나 너트에 비해 힘이 약하기 때문에 휴지걸이, 옷걸이 등에 응용하면 좋습니다. 감사합니다. 😄
Mto inteligente
Parabéns pela ideia
Genio
Maravilha!!!!🤙🏻👏🏻
Good post.
I do much the same with epoxy resin. Heat a bolt and coat it with wax. Fill a hole with epoxy resin. Press in the (waxy) bolt. Back the bolt out a few hours later when the epoxy is cured. You can always heat the bolt slightly, if needed, with a soldering iron. Now you have super good threads that can be remolded if they accidentally get cross threaded. Mine is a boat builder’s technique.
Ótimas dicas. Obrigada .
It’s a decent idea for light duty but in reality you can thread into wood without glue or anything just think drywall is hung with screws lol now in light work on other materials it’s not a bad idea
La leche estos videos me dejan alucinado, como gente tiene estás ideas tan práctica que me viene bien saber.Gracias por enseñar a los demás.👏👍🐕🐕🐕🇯🇪🏴☠️
Excelente aula
Interesting bit of ingenuity there. I’m curious on how well flex seal may do for more weighted objects now.
The algorithm did it again. I had no business whaching this, but it was amazing.
Пластмассовый дюбель вам в помощь. И быстро и удобно , и держать будет покруче.
Спасибо!Теперь кто угодно может нить, не нажимая на биты.Очень познавательно!
Надо использовать болты меньшего размера , и потом уже закручивать побольше , иначе вылетит .
Parabéns pelo vídeo, ficou boa a idéia usando cola quente👍👍
Я всегда использовал на нить и нажимал на биты , а теперь этого делать не обязательно! Спасибо!
По секрету скажу, можно использовать саморезы для таких целей
Спасибо за идею! Всё гениальное просто! 👍👍👍
It would also increase strength if when you initially dig the drill holes, you could remove more wood from the deepest part of the hole so that the thread mold essentially creates “grooves” that is deeply embedded in the wood once the glue is dry.
Ещё один гениальный способ применения термоклея, когда его больше не на что потратить. А мы, дураки, всё дюбели да саморезы используем, когда, оказывается, можно закрутить в стену винт)))
This is a great experiment. Can be utilized for existing holes in anything, or in fragile material. Awesome
Спасибо, что подсказали. А то я всё время нажимал на биты и никак не мог делать нить. 😉
Спасибо, что подсказали. А то я всё время нажимал на биты и никак не мог делать нить. 😉
Ну теперь точно смогу нить, но нажимать на биты все же очень хочется. Спасибо и на том
I work in quality engineering. I will replicate this experiment and do some durability testing using this on different materials like wood, steel, aluminum etc. Then after I have the results I will repost in this comment thread the results from the data for metrics like:
Torque and Angle limits
Breakaway Torque
Thread clamping /Yield strength
Durability @ different temperatures etc.
This should be interesting……..
Que cara inteligente. Ele fez uma bucha de silicone. Parabéns.
Que top, ideia brilhante
Respeito e Gratidão irmão, parabéns!!!
This Is Brilliant! I Really Hope I Have An Opportunity To Use This One Day! 🙂